MOUNT / PROTECT / CONTROL
Ultrasonic mounting accessories & pump controllers
Select the connection, clearance and control package with the sensor—not after the tank is installed.
A raised nozzle does not remove the blind zone
Raising the acoustic face can provide more clearance above maximum liquid level, but a long or narrow nozzle can create strong echoes. Confirm inside diameter, length, smoothness, face position and venting against the selected sensor instructions. Do not choose a universal 300 mm riser by default.
Brackets and outdoor protection
A rigid, level bracket keeps the beam aligned. Specify cantilever reach, fasteners, loading and corrosion exposure. A sun/rain hood can reduce direct solar heating, but does not change the sensor’s ambient rating.
Duplex pumping and flow calculation
A controller upgrade requires a compatible transducer or signal input, a defined cable route and explicit logic. Confirm lead/lag alternation, start/stop levels, sensor failure action, run feedback and contactor interfaces. Flow totalization needs the exact primary flume or weir geometry and head datum.
COMPLETE THE INSTALLATION
Specify the hardware around the sensor.
Standard water-service planning allowances, not confirmed prices. Custom machining, minimum quantities, special documents, freight and tax are quoted separately. Large brackets and nozzles may increase volumetric freight.
START WITH YOUR PROCESS
A useful quotation starts with the tank.
Send the medium, dimensions, connection and signal. Replacing an existing device? Include its exact model and controller.