UltrasonicLevelSensorsRequest a quote ↗
Menu

POINT DETECTION / TWO ACOUSTIC PATHS

Ultrasonic gap & point level switches

Select wetted gap sensing or external through-wall point detection according to the liquid and vessel construction.

Get a project quotation ↗

Ultrasonic gap level switch

Liquid bridging a U-shaped sensing gap transmits acoustic energy differently from gas. This avoids dependence on liquid dielectric constant, but does not eliminate all process effects: bubbles, suspended solids, thick coatings and retained viscous liquid can prevent correct switching. Specify gap orientation, cleaning and fail-safe output.

External clamp-on point detection

An externally coupled sensor sends sound through the vessel wall. Wall thickness, material, curvature, liners, couplant and temperature all matter. A successful trial on a representative tank is needed. A point-level switch does not provide continuous tank level simply by changing its controller.

Overflow protection needs its own design

Relay selection, diagnostics, proof testing and independence from normal control must be engineered for the site. No safety integrity level, hazardous-area approval or universal pressurised-cylinder suitability is claimed for these enquiry families.

COMPLETE THE INSTALLATION

Specify the hardware around the sensor.

Standard water-service planning allowances, not confirmed prices. Custom machining, minimum quantities, special documents, freight and tax are quoted separately. Large brackets and nozzles may increase volumetric freight.

Review mounting & control options →

START WITH YOUR PROCESS

A useful quotation starts with the tank.

Send the medium, dimensions, connection and signal. Replacing an existing device? Include its exact model and controller.

Discuss your application ↗