UltrasonicLevelSensorsRequest a quote ↗
Menu

CONTINUOUS LEVEL / LIQUIDS

Non-contact ultrasonic level sensors for liquid tanks & wastewater

Choose a compact, integral or remote-display ultrasonic configuration around the actual tank, headspace and control system.

Get a project quotation ↗

Range starts at the acoustic face

Short dosing tanks may need a compact 3 m configuration; standard tanks often call for 5–15 m, while deep sumps or large tanks need a separate high-energy range review. These are application targets. Blocking distance, solids derating, vapours and surface conditions determine the usable span.

Water, wastewater and open-channel flow

For clean water, keep the beam normal to the surface and clear of fittings. For wastewater, describe condensation, debris and surface foam. Flume flow requires an identified primary device, valid head relationship, correct upstream sensor position and channel conditions; a level signal alone is not a flow meter.

Chemical, hot-liquid and hazardous-area screening

PVDF or PTFE-face construction is selected against chemical concentration and temperature. Hot vapour, pressure or dense foam can make through-air ultrasound unsuitable. Oil or solvent duty needs a separate area-classification and exact-certificate review. No hazardous-area approval is inferred from the enclosure.

COMPLETE THE INSTALLATION

Specify the hardware around the sensor.

Standard water-service planning allowances, not confirmed prices. Custom machining, minimum quantities, special documents, freight and tax are quoted separately. Large brackets and nozzles may increase volumetric freight.

Review mounting & control options →

START WITH YOUR PROCESS

A useful quotation starts with the tank.

Send the medium, dimensions, connection and signal. Replacing an existing device? Include its exact model and controller.

Discuss your application ↗