ULS-GAP / High/low detection in suitable process liquids
Ultrasonic gap point-level switch
A wetted acoustic gap detects whether liquid bridges the sensing path. Select drainage, materials and output behaviour around the actual liquid.
Configure an RFQ ↗Configuration review
ULS enquiry family; the exact offered model and specification are confirmed before order.
| Principle | Ultrasonic transmission across a U-shaped gap |
|---|---|
| Construction request | Stainless steel or selected alloy; exact grade by quotation |
| Output request | SPDT / DPDT or transistor; exact configuration required |
| Process limits | Bubbles, solids, viscosity and retained coating require review |
| Safety role | No SIL, independent protection layer or certified overfill claim |
What decides suitability?
Gap sensing is less dependent on dielectric properties than capacitance measurement, but deposits bridging the gap, trapped liquid and bubbles can still cause false indication. Orient the gap to drain. Verify response delay, fail-safe state and proof-test procedure for the project.
Before order confirmation
Confirm exact measuring range and blind zone, materials and seals, pressure/temperature limits, supply/load, connection drawing, output behaviour and any required certificates. Stock, price and dispatch are confirmed in the quotation.
Documents & inspection checklist →COMPLETE THE INSTALLATION
Specify the hardware around the sensor.
Standard water-service planning allowances, not confirmed prices. Custom machining, minimum quantities, special documents, freight and tax are quoted separately. Large brackets and nozzles may increase volumetric freight.
START WITH YOUR PROCESS
A useful quotation starts with the tank.
Send the medium, dimensions, connection and signal. Replacing an existing device? Include its exact model and controller.